PRODUCT=19/0/1/0 NAME="Power Button" PHYS="LNXPWRBN/button/input0" PROP=0 EV=3 KEY=8000 10000000000000 0 MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,8F,ramlsfw  0_I|Mjq؂*lY>TD  r`S _I|+/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ /* * i2c-dev.h - I2C bus char device interface * * Copyright (C) 1995-97 Simon G. Vogl * Copyright (C) 1998-99 Frodo Looijaard */ #ifndef _UAPI_LINUX_I2C_DEV_H #define _UAPI_LINUX_I2C_DEV_H #include #include /* /dev/i2c-X ioctl commands. The ioctl's parameter is always an * unsigned long, except for: * - I2C_FUNCS, takes pointer to an unsigned long * - I2C_RDWR, takes pointer to struct i2c_rdwr_ioctl_data * - I2C_SMBUS, takes pointer to struct i2c_smbus_ioctl_data */ #define I2C_RETRIES 0x0701 /* number of times a device address should be polled when not acknowledging */ #define I2C_TIMEOUT 0x0702 /* set timeout in units of 10 ms */ /* NOTE: Slave address is 7 or 10 bits, but 10-bit addresses * are NOT supported! (due to code brokenness) */ #define I2C_SLAVE 0x0703 /* Use this slave address */ #define I2C_SLAVE_FORCE 0x0706 /* Use this slave address, even if it is already in use by a driver! */ #define I2C_TENBIT 0x0704 /* 0 for 7 bit addrs, != 0 for 10 bit */ #define I2C_FUNCS 0x0705 /* Get the adapter functionality mask */ #define I2C_RDWR 0x0707 /* Combined R/W transfer (one STOP only) */ #define I2C_PEC 0x0708 /* != 0 to use PEC with SMBus */ #define I2C_SMBUS 0x0720 /* SMBus transfer */ /* This is the structure as used in the I2C_SMBUS ioctl call */ struct i2c_smbus_ioctl_data { __u8 read_write; __u8 command; __u32 size; union i2c_smbus_data __user *data; }; /* This is the structure as used in the I2C_RDWR ioctl call */ struct i2c_rdwr_ioctl_data { struct i2c_msg __user *msgs; /* pointers to i2c_msgs */ __u32 nmsgs; /* number of i2c_msgs */ }; #define I2C_RDWR_IOCTL_MAX_MSGS 42 /* Originally defined with a typo, keep it for compatibility */ #define I2C_RDRW_IOCTL_MAX_MSGS I2C_RDWR_IOCTL_MAX_MSGS #endif /* _UAPI_LINUX_I2C_DEV_H */ $  dx?ai~j"TzATţ? /* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */ /* * Input event codes * * *** IMPORTANT *** * This file is not only included from C-code but also from devicetree source * files. As such this file MUST only contain comments and defines. * * Copyright (c) 1999-2002 Vojtech Pavlik * Copyright (c) 2015 Hans de Goede * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License version 2 as published by * the Free Software Foundation. */ #ifndef _UAPI_INPUT_EVENT_CODES_H #define _UAPI_INPUT_EVENT_CODES_H /* * Device properties and quirks */ #define INPUT_PROP_POINTER 0x00 /* needs a pointer */ #define INPUT_PROP_DIRECT 0x01 /* direct input devices */ #define INPUT_PROP_BUTTONPAD 0x02 /* has button(s) under pad */ #define INPUT_PROP_SEMI_MT 0x03 /* touch rectangle only */ #define INPUT_PROP_TOPBUTTONPAD 0x04 /* softbuttons at top of pad */ #define INPUT_PROP_POINTING_STICK 0x05 /* is a pointing stick */ #define INPUT_PROP_ACCELEROMETER 0x06 /* has accelerometer */ #define INPUT_PROP_MAX 0x1f #define INPUT_PROP_CNT (INPUT_PROP_MAX + 1) /* * Event types */ #define EV_SYN 0x00 #define EV_KEY 0x01 #define EV_REL 0x02 #define EV_ABS 0x03 #define EV_MSC 0x04 #define EV_SW 0x05 #define EV_LED 0x11 #define EV_SND 0x12 #define EV_REP 0x14 #define EV_FF 0x15 #define EV_PWR 0x16 #define EV_FF_STATUS 0x17 #define EV_MAX 0x1f #define EV_CNT (EV_MAX+1) /* * Synchronization events. */ #define SYN_REPORT 0 #define SYN_CONFIG 1 #define SYN_MT_REPORT 2 #define SYN_DROPPED 3 #define SYN_MAX 0xf #define SYN_CNT (SYN_MAX+1) /* * Keys and buttons * * Most of the keys/buttons are modeled after USB HUT 1.12 * (see http://www.usb.org/developers/hidpage). * Abbreviation