0
  #   ˆl–äY>”TÔD¨ 	Årã`SÿÉƒo¿ÀÁÇ ?    /* SPDX-License-Identifier: GPL-2.0 */
#ifndef	__SPI_BITBANG_H
#define	__SPI_BITBANG_H

#include <linux/workqueue.h>

struct spi_bitbang {
	struct mutex		lock;
	u8			busy;
	u8			use_dma;
	u16			flags;		/* extra spi->mode support */

	struct spi_master	*master;

	/* setup_transfer() changes clock and/or wordsize to match settings
	 * for this transfer; zeroes restore defaults from spi_device.
	 */
	int	(*setup_transfer)(struct spi_device *spi,
			struct spi_transfer *t);

	void	(*chipselect)(struct spi_device *spi, int is_on);
#define	BITBANG_CS_ACTIVE	1	/* normally nCS, active low */
#define	BITBANG_CS_INACTIVE	0

	/* txrx_bufs() may handle dma mapping for transfers that don't
	 * already have one (transfer.{tx,rx}_dma is zero), or use PIO
	 */
	int	(*txrx_bufs)(struct spi_device *spi, struct spi_transfer *t);

	/* txrx_word[SPI_MODE_*]() just looks like a shift register */
	u32	(*txrx_word[4])(struct spi_device *spi,
			unsigned nsecs,
			u32 word, u8 bits, unsigned flags);
	int	(*set_line_direction)(struct spi_device *spi, bool output);
};

/* you can call these default bitbang->master methods from your custom
 * methods, if you like.
 */
extern int spi_bitbang_setup(struct spi_device *spi);
extern void spi_bitbang_cleanup(struct spi_device *spi);
extern int spi_bitbang_setup_transfer(struct spi_device *spi,
				      struct spi_transfer *t);

/* start or stop queue processing */
extern int spi_bitbang_start(struct spi_bitbang *spi);
extern int spi_bitbang_init(struct spi_bitbang *spi);
extern void spi_bitbang_stop(struct spi_bitbang *spi);

#endif	/* __SPI_BITBANG_H */
  7   ˆl–Ãa¾”ªClÊq@?q±\êbÑ¿Ê0a–ßi~”ªj"Tâ€~ã-Üd*bÑ¿É  #   ˆl–ßi~”Êe¶¥Aàq )‹FÿÌ„}ÇÝg¿Ê ?÷     default partial alphanumeric_keys
xkb_symbols "basic" {

    include "latin"

    name[Group1]="French";

    key <AE01>	{ [ ampersand,          1,  onesuperior,   exclamdown ]	};
    key <AE02>	{ [    eacute,          2,   asciitilde,    oneeighth ]	};
    key <AE03>	{ [  quotedbl,          3,   numbersign,     sterling ]	};
    key <AE04>	{ [apostrophe,          4,    braceleft,       dollar ]	};
    key <AE05>	{ [ parenleft,          5,  bracketleft, threeeighths ]	};
    key <AE06>	{ [     minus,          6,          bar,  fiveeighths ]	};
    key <AE07>	{ [    egrave,          7,        grave, seveneighths ]	};
    key <AE08>	{ [underscore,          8,    backslash,    trademark ]	};
    key <AE09>	{ [  ccedilla,          9,  asciicircum,    plusminus ]	};
    key <AE10>	{ [    agrave,          0,           at,       degree ]	};
    key <AE11>	{ [parenright,     degree, bracketright, questiondown ]	};
    key <AE12>	{ [     equal,       plus,   braceright,  dead_ogonek ]	};

    key <AD01>	{ [         a,          A,           ae,           AE ]	};
    key <AD02>	{ [         z,          Z, guillemotleft,        less ]	};
    key <AD03>	{ [         e,          E,     EuroSign,         cent ]	};
    key <AD11>	{ [dead_circumflex, dead_diaeresis, dead_diaeresis, dead_abovering ] };
    key <AD12>	{ [    dollar,   sterling,     currency,  dead_macron ]	};

    key <AC01>	{ [         q,          Q,           at,  Greek_OMEGA ]	};
    key <AC10>	{ [         m,          M,           mu,    masculine ]	};
    key <AC11>	{ [    ugrave,    percent, dead_circumflex, dead_caron]	};
    key <TLDE>	{ [twosuperior, asciitilde,     notsign,      notsign ]	};

    key <BKSL>	{ [  asterisk,         mu,   dead_grave,   dead_breve ]	};
    key <AB01>	{ [         w,          W,      lstroke,      Lstroke ]	};
    key <AB07>	{ [     comma,   question,   dead_acute, dead_doubleacute ] };
    key <AB08>	{ [ semicolon,     period, horizconnector,   multiply ]	};
    key <AB09>	{ [     colon,      slash, periodcentered,   division ]	};
    key <AB10>	{ [    exclam,    section, dead_belowdot, dead_abovedot ] };

    include "level3(ralt_switch)"
};

partial alphanumeric_keys
xkb_symbols "olpc" {
    // Contact: Sayamindu Dasgupta <sayamindu@laptop.org>
    include "fr(basic)"

    name[Group1]="French";