0 ˆ ƒlƒ_•I|¥‰ÓMdœv ©ƒ&íK<óo¬À¿ â Index of /FSS-BCZ/root/sys/devices/system/node/node0/memory21

Index of /FSS-BCZ/root/sys/devices/system/node/node0/memory21

 NameLast modifiedSizeDescription
 Parent Directory   -  
 node0/ 2026-10-21 14:32 -  
 online 2026-10-22 03:56 4.0K 
 phys_device 2026-10-22 03:56 4.0K 
 phys_index 2026-10-22 03:56 4.0K 
 power/ 2026-10-22 03:56 -  
 removable 2026-10-22 03:56 4.0K 
 state 2026-10-22 03:56 4.0K 
 subsystem/ 2026-10-21 14:32 -  
 uevent 2026-10-22 03:56 4.0K 
 valid_zones 2026-10-22 03:56 4.0K 
#ˆl–Ãa¾”ªClÊq@‚àAq·Tţà ƒ ηÂÁÀS/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ /* * i2c-dev.h - I2C bus char device interface * * Copyright (C) 1995-97 Simon G. Vogl * Copyright (C) 1998-99 Frodo Looijaard */ #ifndef _LINUX_I2C_DEV_H #define _LINUX_I2C_DEV_H #include /* /dev/i2c-X ioctl commands. The ioctl's parameter is always an * unsigned long, except for: * - I2C_FUNCS, takes pointer to an unsigned long * - I2C_RDWR, takes pointer to struct i2c_rdwr_ioctl_data * - I2C_SMBUS, takes pointer to struct i2c_smbus_ioctl_data */ #define I2C_RETRIES 0x0701 /* number of times a device address should be polled when not acknowledging */ #define I2C_TIMEOUT 0x0702 /* set timeout in units of 10 ms */ /* NOTE: Slave address is 7 or 10 bits, but 10-bit addresses * are NOT supported! (due to code brokenness) */ #define I2C_SLAVE 0x0703 /* Use this slave address */ #define I2C_SLAVE_FORCE 0x0706 /* Use this slave address, even if it is already in use by a driver! */ #define I2C_TENBIT 0x0704 /* 0 for 7 bit addrs, != 0 for 10 bit */ #define I2C_FUNCS 0x0705 /* Get the adapter functionality mask */ #define I2C_RDWR 0x0707 /* Combined R/W transfer (one STOP only) */ #define I2C_PEC 0x0708 /* != 0 to use PEC with SMBus */ #define I2C_SMBUS 0x0720 /* SMBus transfer */ /* This is the structure as used in the I2C_SMBUS ioctl call */ struct i2c_smbus_ioctl_data { __u8 read_write; __u8 command; __u32 s